Siemens Gigaset C450IP User Manual

Page of 106
39
Using several handsets
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / T-NetBox_SAG-registration.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Using several handsets
Registering handsets
You can register up to six handsets to your 
base station.
Registering another Gigaset C45 
handset 
Before you can use your handset, you 
must register it to a base station.
You must initiate handset registration on 
the handset and on the base station.
If the handset has been registered suc-
cessfully you will see the display key 
§INT§
 at 
the bottom left of the display. Otherwise 
repeat the procedure.
On the handset 
Menu§
 
¢
Settings 
¢
Handset 
¢
Register 
Handset
~
Enter the system PIN of the 
base station (the default is 
0000) and press 
§OK§
. The dis-
play shows e.g. 
Registering 
and
 
Base 
is flashing.
On the base station 
÷
Within 60 secs. press and hold 
the registration/paging key on 
the base station (page 1) 
(min. 1 sec.). 
The handset is assigned the lowest unas-
signed internal number (1–6). If several 
handsets are registered to the base sta-
tion, the internal number is shown in the 
display after registration, e.g. 
INT 2
. This 
means that the handset has been assigned 
the internal number 2. 
Registering other handsets
You can register other Gigaset handsets 
and handsets for other devices with GAP 
functionality as follows. 
On the handset
¤
Start to register the handset as 
described in its user guide.
On the base station
÷
Press and hold the registra-
tion/paging key on the base 
station (page 1) (min. 1 sec.). 
Please note:
– If there are several handsets registered to 
your base station, you can use one to make 
a call via the fixed network and the other to 
make a call via the Internet at the same 
time.
– As a rule, all calls from a registered GAP 
handset are dialled via the connection type 
(fixed network or VoIP, see page 46) that 
has been set up as 
Default Line Type
If you want to establish a connection via 
the other connection type, enter a "*" (star) 
after the phone number. Example: 
0498912345671234567*. 
Please note:
If six handsets are already registered to the 
base station, there are two options:
– The handset with the internal number 6 is 
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset 
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is 
being used: the handset you wish to regis-
ter cannot be registered.