Panasonic KX-TCD715ALM User Manual
43
Special Features
Basic Operations
Chapter 2
Ex. Line access number
(PBX)
➡
➡
Phone number
9
9
1
Press .
2
Press
or
until the arrow points
to “
Setting Base
”, then press
.
•
“
Input Command
” is displayed.
3
Press .
4
Enter the 4-digit base unit PIN (p. 55).
•
The factory preset is 0000.
5
Press .
•
The current timing is displayed.
1: 3 seconds 2: 5 seconds
1: 3 seconds 2: 5 seconds
3
3
6
To select 5 seconds, press
.
OR
To select 3 seconds, press
To select 3 seconds, press
.
7
Press .
•
A beep sounds.
•
To return to the standby mode, press
.
•
If 5 beeps sound in step 4, the entered PIN is
incorrect. Enter the correct PIN.
incorrect. Enter the correct PIN.
1
2
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
if a pause is required for dialling with a PBX or to access a long
distance service.
•
Pressing
creates a pause.
This prevents misdialling when you redial or dial a stored number.
•
Pressing
more than once increases the length of the pause between numbers.
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
factory preset is 3 seconds.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
I n p u t C o m m a n d
3 3 1
Ex. 3 second is selected.
KX-TCD715ALM-5Basic3 6/20/02 18:47 Page 43