Sharp PG-M25X Operating Guide
Easy to Use Functions
-89
Selected Item
Normal
Level A
Level B
Description
All On-screen Displays are displayed.
Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed.
All On-screen Displays are not displayed.
(except Menu, On-screen displays displayed when the LENS button is pressed, and
warning displays (Power off/Temp./Lamp, etc.))
(except Menu, On-screen displays displayed when the LENS button is pressed, and
warning displays (Power off/Temp./Lamp, etc.))
Setting On-screen Display
This function allows you to turn on or off the on-screen messages. When setting “
Level B”
in “OSD Display”, the input mode display (e.g. “INPUT 1”) will not appear, even if the INPUT
button is pressed.
button is pressed.
4
Press
to move the inset pic-
ture.
•
The inset picture will be moved to the
inset picture frame.
inset picture frame.
Note
•
The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
•
The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
as follows, Pict in Pict does not work:
•
With a resolution that exceeds SXGA.
•
When the input signal is 480
I
, 480P,
720P or 1080
I
.
•
When the input signal has changed to
the Interlace mode using RGB signals.
the Interlace mode using RGB signals.
•
When the picture display mode is set to
“DOT BY DOT”.
“DOT BY DOT”.
•
When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
or when the resolution or refresh rate
(vertical frequency) is changed.
•
You can use
on the GyroRemote or
on the projector to change the inset
picture.
Turning Off the
On-screen Display
On-screen Display
Select “OSD Display” in the “Options
(1)” menu
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
(1)” menu
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
•
Standby message in INPUT 4 will appear
regardless of “OSD Display” level.
regardless of “OSD Display” level.
PG-M25X#E#p78_96.p65
02.4.29, 3:22 PM
89