Vidikron 85 User Manual

To install the fixed CineWide base plate on a Vision 85/CineWide:

1.

Place the projector upside down on a blanket or other soft surface. 

2.

If you are mounting the Vision 85/CineWide on a ceiling: Position the left and right 
ceiling mounting rails (provided with the Vision 85 ceiling mount kit) as shown in Figure 
3-9. Position the CineWide base plate on top of the ceiling mounting rails so that the 
outermost holes line up with the front mounting hole on each rail. 

3.

Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector 
with the four, 10-32 x 1/2" screws and washers provided with the CineWide lens base 
plate. Note that you only need to use two washers if the Vision 85/CineWide is to be 
ceiling-mounted. 

 

4.

Use four (4) of the 10-32 x 3/8" screws provided with the Vision 85 ceiling mount kit to 
secure the ceiling mounting rails to the projector. 

➤

Washers under
Base Plate
(2 places)

Washers under
Base Plate
(4 places)