Vidikron 85 User Manual

Table 4-3 describes the effects of adjusting the primary color hues. 

• Saturation: This slidebar adjusts the color saturation level – the amount of that color in a 

video image. Lower settings produce less saturated colors; a setting of “-30” removes that 
color from the image entirely. If the saturation is too high, that color will be overpowering 
and unrealistic.

• Intensity: This slidebar adjusts the intensity – also known as luminance – of a given color. 

• Reset to Defaults: To reset ALL ICC settings – Hue, Saturation AND Intensity of all six 

colors – for the currently-selected “Picture Memory“ preset to their factory-default values, 
select Reset to Defaults (directly below the “Intensity” menu item) from the ACC Adjust 
menu. Then, select Yes to confirm the reset. 

To reset only the Hue, Saturation OR Intensity of all six colors for the currently-selected 
“Picture Memory“ preset to their factory-default values, select Hue, Saturation or Intensity 
from the ACC Adjust menu and press ENTER. Then, select Reset to Defaults (the last menu 
item) from the ACC Adjust menu. Then, select Yes to confirm the reset. 

Color Enhance: Select Color Enhance from the Advanced Picture Adjust menu to change the 
Color Enhance setting. Color Enhance utilizes a new color-processing algorithm and 
system-level enhancements to provide higher picture brightness while providing truer, more 
vibrant colors. To enable Color Enhance, set it to On; to disable it, set it to Off. 

SD Advanced Mode: Select SD Advanced Mode from the Advanced Picture Adjust menu to 
adjust the projector’s motion detection threshold. Doing so can improve detail and minimize 
flickering or motion artifiacts. Choose the appropriate setting for the selected source: Motion 
for high-definition video, Graphic for still pictures or graphics or Game for video gaming. 

Film Mode: Refer to Film Mode on page 62.

Video NR: To apply noise reduction to the input signal, select Video NR from the Advanced 
Picture Adjust menu. Noise reduction is useful for improving the signal-to-noise ratio of 
video signals. Set it to Off, 1, 2 or 3, as needed, keeping in mind that higher settings (which 
reduce high frequencies) may also “soften” the image.

MPEG NR: Select MPEG NR from the Picture Adjust menu to reduce or eliminate so-called 
“mosquito noise” in MPEG-compressed video signals (digital broadcasts or DVDs). Set it to 
Off, 1, 2 or 3, as needed to minimize distortion around the edges of moving objects, moving 
artifacts around edges and/or blotchy noise patterns superimposed over the objects. 

Sharpness Enhancement: select Sharpness Enhancement from the Advanced Picture 
Adjust menu to apply edge enhancement to images, giving the impression of added depth. 
Set it to Off, 1, 2, or 3 as desired. 

Red

Yellow

Green

Cyan

Blue

Magenta