Toshiba 2000-series User Manual

➤

You can transfer a call to a busy station from either a DSS console or an DADM. Use 
the [DSS] to transfer the call, even though the [DSS] LED associated with the station 
you are “transferring to” is red.

➤

1. Press [DSS] 

corresponding to the 
station to be called.

The call is placed automatically on hold. The Line or 
[DN] LED flashes green at double the on-hold rate, 
and the [DSS] LED flashes green.

You hear a single-ring tone. (If using the Tone 
signaling mode, you hear successive ring tones.)

2. Announce the call.

With Tone signaling, you would have to wait for the 
called station to answer before announcing the call.

3. Hang up.

The call rings the called station when you hang up. 
While the called station is ringing, the [DSS] LED is 
steady red, and the Line LED flashes green at the on-
hold rate or if on a [DN] button, it goes idle. 

When the called station answers the call, the [DSS] 
LED stays steady red, and the Line LED becomes 
steady red.

4. If the station does not 

answer before a 
period set in system 
programming, the call 
recalls your station.

1. Press [DSS] 

corresponding to the 
busy station to be 
called.

You may hear a busy tone. The original caller is placed 
automatically on hold. The Line or [DN] LED flashes 
green at double the on-hold rate, and the [DSS] LED 
remains steady red.