Shiro SC3128 User Manual
SC3128 User Guide
4
1. INSTALLING OR REPLACING THE BATTERY
Install 3 Alkaline AA batteries into the battery compartment and re-fit the cover before use.
IMPORTANT—before removing the battery compartment cover, ensure the base unit
is disconnected from the telephone line.
is disconnected from the telephone line.
Connection and conditions for use
You can connect your SC3128, to public networks in the United Kingdom or to an
approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax
machines, etc.) has a ringer equivalence numbers (REN). The RENs of all
equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
SC3128 has a REN of 1, and most other telephones have a REN of 1 unless marked
otherwise.
You can connect your SC3128, to public networks in the United Kingdom or to an
approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax
machines, etc.) has a ringer equivalence numbers (REN). The RENs of all
equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
SC3128 has a REN of 1, and most other telephones have a REN of 1 unless marked
otherwise.
2. SWITCH OPERATION
VOLUME switch
Select your preferred volume either HI or LOW. The selection is at the back of the telephone.
RINGER switch
Select your preferred ringing tone either HI or LOW. The selection is at the back of the
telephone.
telephone.
3. SOFTWARE SETTING
Under on-hook condition, press SET key into configuration mode. The LCD will display: VIEW
MENU ↑↓.
MENU ↑↓.
Use UP key to navigate through the list. To enter or confirm an item, press SET
key.
SET ITEM
OPERATIONS
LANGUAGE
SELECTION
SELECTION
LCD panel displays SELECT LANGUAGE, press SET key and you will see
ENGLISH as default. Use UP key to select the language (English/
ENGLISH as default. Use UP key to select the language (English/