RAD Data comm Vmux-2100 User Manual

Vmux-2100 Installation and Operation Manual

Chapter 7 Monitoring and Statistics Collection

Collecting Statistics

7-7

Table 7-2. Sanity Errors and Warnings (Cont.)

Display Type

Description

ILLEGAL DESTINATION IP
ADDRESS

Error

Destination IP address for a bundle is not defined

ILLEGAL SOURCE IP ADRESS

Error

A group IP address is illegal or not defined

Note: The following IP addresses are reserved for the main and voice card internal communication and cannot

be assigned by the user: 1.1.1.255 and 1.1.1.0 to 1.1.1.8.

TS INCLOMPATIBLE WITH E1

TYPE

Error

Timeslot 16 is configured to HDLC when E1 is set to the

G.732S framing mode. Timeslot 16 configuration must be
changed to not connected

TOO MANY CONFIGURED

Error

Number of timeslots assigned to carry voice exceeds the

number of timeslots supported by the unit

TS 16 SHOULD BE
DISCONNECTED IN CAS

MODE

Error

Timeslot 16 is configured to Voice when operating Vmux-2100
with CAS signaling. Timeslot 16 configuration must be changed

to not connected

7.3 Collecting Statistics

This section explains how to display performance data collected on the
Vmux-2100 main link and E1/T1 groups.

Displaying Statistics on the Main Link Ports

Vmux-2100 evaluates performance of the 10/100BaseT port and calculates the
main card CPU utilization.

Collecting the Main Link Ethernet Statistics

To display the main link Ethernet statistics:
1. From the Main menu, choose Monitoring.

The Monitoring menu appears.

2. From the Monitoring menu, choose Statistics.

The Statistics menu appears (see

Statistics

1. Cards statistics

2. Main Module statistics

@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit

Figure 7-6. Statistics Menu

3. From the Statistics menu, choose Main Module statistics.

The Main Module Statistics menu appears (see