Panasonic 1210 User Manual

1. Plug the headset cord into the headset jack on the back of the IP 

Phone marked with the 

)

 symbol.

 shows the connections on the back of the IP 

Phone.

2. Thread the cord through the channel in the side of the foot stand.

3. Set up the headset according to the headset instructions.

Your IP Phone supports AC power and Power over Ethernet (PoE). For 
AC power, use only the Nortel-approved Global Power Supply 
(N0146475) and the country-specific IEC cable that you can order 
separately. To use PoE, your connected LAN must support PoE.

Your IP Phone 1210 supports AC power and PoE options, 

including IEEE 802.3 standard power. To use local AC power, you can 
order the optional AC adapter separately. To use PoE, where power is 
delivered over the CAT5 cable, the LAN must support PoE, and you 
do not require an AC adapter.

1. Connect the DC barrel connector to the power jack on the back of the 

IP Phone. 

2. Thread the cable through the channel in the foot stand to secure the 

cable. 

3. Plug the country-specific IEC cable into the Global Power Supply, 

and then plug the Global Power Supply into the nearest AC power 
outlet.

Use your IP Phone 1210 with the 
approved Nortel AC Adapter (model 
#N0089601).