Multi-Tech Systems MVP-130/130FXS User Manual

 

   

Download Factory Defaults  Select this to return the configuration 

parameters to the original factory 
values. 

Download Firmware 

Select this to download new versions 
of firmware as enhancements become 
available. 

Download IFM Firmware 

Select this to download new versions 
of IFM firmware as enhancements 
become available. The Interface 
Module (IFM) is the telephony 
interface for analog MultiVOIP units 
(MVP130, MVP130FXS, MVP210, 
MVP410, MVP810).  There is one IFM 
for each channel of the MultiVOIP 
unit.  For each channel, the IFM 
handles the analog signals to and from 
the attached telephone, PBX or CO 
line. 

Download User Defaults 

To be used after a full set of parameter 
values, values specified by the user, 
have  been saved (using Save Setup).  
This command loads the saved user 
defaults into the MultiVOIP. 

Set Password 

Select this to create a password for 
access to the MultiVOIP software 
programs (Program group commands, 
Windows GUI, web browser GUI, & 
FTP server).  Only the FTP Server 
function requires a password for access.  
The FTP Server function also requires 
that a username be established along 
with the password.  

Uninstall 

Select this to uninstall the MultiVOIP 
software (most, but not all components 
are removed from computer when this 
command is invoked). 

Upgrade Software 

Loads firmware (including H.323 
stack) and factory default settings from 
the controller PC to the MultiVOIP 
unit.