Multi-Tech Systems MVP-130/130FXS User Manual

 

This chapter gets the MultiVOIP up and running quickly.  The details 
we’ve skipped to make this brief can be found elsewhere in the manual 
(see Table of Contents and Index).   

Summary 

z Collecting Phone/IP 

The MultiVOIP must be configured to 
interface with your particular phone 
system and IP network.  To do so, 
certain details must be known about 
those phone and IP systems.   

z Placement 

Decide where you’ll mount the voip. 

z Command/Control 

Some modest minimum specifications 
must be met.  A COM port must be set 
up. 

z Hookup 

Connect power, phone, and data cables 
per diagram. 

z Software Installation

This is the configuration program.   
It’s a standard Windows software 
installation. 

z Phone/IP Starter 

You will enter phone numbers and IP 
addresses.  You’ll use default parameter 
values where possible to get the system 
running quickly. 

z Phonebook Starter 

The phonebook is where you specify 
how calls will be routed.  To get the 
system running quickly, you’ll make 
phonebooks for just two voip sites. 

z Connectivity Test

You’ll find out if your voip system can 
carry phone calls between two sites.  
That means you’re up and running! 

z Troubleshooting

Detect and remedy any problems that 
might have prevented connectivity.