Speco Technologies 16TH User Manual

 

User’s Manual

 

 

DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10

 

107

The Sequence Setup menu allows the user to set the camera sequence 
schedule and dwell time for main and call monitor. Select <Sequence Setup> 
in Main menu and press ENTER; the menu displays as follows. Items in the 
Sequence Setup menu are described in the following subsections. 
 

Sequence Setup 

Main Monitor Dwell 
Main Monitor Schedule 
Call Monitor Dwell   
Call Monitor Schedule 

5 Sec 

 

5 Sec 

 

 

The Main / Call Monitor can be set to display full screen video for all installed 
cameras in sequence. This item is used to set the Main / Call Monitor dwell 
time, which is the amount of time elapsed between switching images. The 
dwell time has an available range of 1 to 120 seconds.   
 

This item is used to set the Main / Call Monitor camera sequence in full 
screen format. Move the cursor to <Main Monitor Schedule> and press 
ENTER; the menu is displayed as follows. 
 

Main Monitor Schedule 

01►02►03►04►05►06►07►08► 

09►10►11►12►13►14►15►16 

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

 

 Back   OK   Cancel  

 
Follow these steps to set a sequence: 

•  Press LEFT direction key to delete the original setting. 
•  Press the desired Channel keys to assign a camera to that location in the 

sequence.  

•  Continue the steps until the sequence is completed. 

 
A sequence can have up to 16 entries. The user can select fewer than 16 
entries for a camera sequence and leave the remaining entries blank. The 
sequence can include a specific camera or cameras multiple times.