Speco Technologies 16TH User Manual

 

User’s Manual

 

 

DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10

 

111

This item is used to select a desired channel for setting the parameters. Move 
the cursor to <Channel Select> and press ENTER, then select a channel 
using UP / DOWN keys. Press ENTER again to confirm the setting. 
 

This item allows the user to enable / disable Video Loss as an alarm event. 
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The 
default setting is <OFF>. 
 

To detect motions, the users can choose from these options: <OFF>, <ALL>, 
<Night & Weekend>, <Day & Weekend>, <Weekend>, <Day & Night>, 
<Night>, and <Day>. The Day, Night, and Weekend is defined in section 

. 

 
If motion detection function is enabled, it is required to define the motion 
detection parameters such as detection area and sensitivity settings. 
 

If motion detection function is enabled, it is required to define the motion 
detection parameters such as detection area and sensitivity settings. Select a 
channel for setting the parameters, move the cursor to <Detection Config>, 
and press ENTER. The Detection Configuration menu displays as follows. 
 

Detection Config 

Detected Area Setup 
Sensitivity 
Area Threshold 

 

92% 

4% 

 

The Detect Area is displayed as follows after selecting this item. The 
detection area consists of 165 (15×11) detection grids.