Speco Technologies 16TH User Manual

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

138 

The remote monitoring software allows users to either view recorded video 
from the DVR, or from the hard disk drive of the PC.   
 
To access the Playback screen, click <Play> button on the main window 
toolbar. There are three tabs in the Playback screen: <Remote Playback>, 
<Local Playback>, and <Verify> tabs. <Remote Playback> allows users to 
play back from the DVR. <Local Playback> enables users to playback a 
recorded video file stored on the hard disk drive of the PC. <Verify> is 
provided for users to authenticate if the exported video is altered. 
 
The DVR continues recording while playing back recorded video on the PC, 
either remote playback or local playback. 
 

To view remote video, click <Play> on the main window toolbar, and then 
<Remote Playback> tab. The <Remote Playback> screen will be displayed.   

 

The <From> and <To> in the <Available Record Video> display the date and 
time from which recorded video is available for playback. 
 
To playback remote video segments, follow these steps: 

•  Choose <Playback> in <Select> field for playback recorded video. 
• In <Start> field, users can change the date and time either by typing 

desired numbers directly or by using the arrow buttons.   

 
To type directly:   
Click on day, month and year of date field respectively, and type the desired 
numbers directly. Follow above steps to adjust the hour, minute and second 
of time field. 
 
To use the arrow buttons:   
Click on the arrow button next to the date field to display the calendar; then 
click the left and right arrow at the top of the calendar to change the date. 
Use up and down arrow next to the time field to change to the wanted time. 

 

•  The other way to select date and time is by moving the blue sliding bar. 
•  Click <OK> to start the playback, or click <Close> to abort.