Speco Technologies 16TH User Manual

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

30 

This section guides you to synchronize your unit to fit the local time. 
 
Go the <System Setup> Æ <Date/ Time> Æ <Time Zone>. Refer to below 
figure and select your time zone from the options. 

 

 
Then go to <System Setup> Æ <Date/ Time> Æ <Network Time Protocol 
Setup> and select <ON> for the item <Automatically Time Sync>. When this 
function is ON, time sync will be performed every hour in order to observe 
correct time of your local zone. 

 

NOTE: If you want the unit to automatically synchronize the local time, 
the <Time Zone> item MUST NOT be set to <OFF>, or the function 

cannot be activated. 

   

The distinctive hybrid solution of the DVR enables users to connect IP 
camera(s) while others are analog cameras. First enter the OSD setup menu 
with a proper account and access <System Setup> Æ <IP Camera Support> 
to select the number of IP cameras to be connected. The supported channels 
of IP cameras will be from the largest numbers, for example CH16 for 16ch 
models.