Speco Technologies 16TH User Manual

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

40 

This section introduce how to view in sequence mode with both Main Monitor 
and Call Monitor, if connected. Sequence function can avoid manually 
backtracking and give more flexibility in surveillance.   

 

The automatic sequence function can be displayed in any viewing mode. 
Select certain viewing format and press SEQ to start the automatic sequence. 
Press ESC to stop and return to live mode. The figure below shows the 
example of displaying sequence in 4-channel viewing mode. 

 

 

Users can use front panel of the DVR-4TH/ 8TH/ 16TH series unit to control a 
call monitor display without having to access the Main menu. Two viewing 
modes can be displayed on call monitor: Sequence display and Single 
camera display. To program the call monitor sequence, refer to section 

.  

 
Follow the steps below to control the call monitor. 

•  Press the CALL key on the front panel to enter call monitor control mode, 

the message “Call Mode” will then be shown on the bottom-left of the 
screen. 

 

 

Press 1-16 Key To Select Channel 

Press SEQ To Enable Sequence 

 

 

• Press any CHANNEL key to display the image of the corresponding 

camera on the call monitor. 

•  Alternatively, press SEQ repeatedly to display the sequence of cameras 

previously programmed in Call Monitor Schedule menu.   

•  Press ESC to return the front panel to Main Monitor Control mode.