Speco Technologies 16TH User Manual

Page of 175
 
User’s Manual
 
 
DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10
 
55
Iris Open 
Press this key to open the Iris and let in more light to the dome camera. 
 
Iris Close 
Press this key to close the Iris and let in less light to the dome camera. 
 
Focus Near 
Press this key to focus the lens of the dome camera at a near position. 
 
Focus Far 
Press this key to focus the lens of the dome camera at a far position.   
 
Zoom In 
Press this key to zoom in the lens of the dome camera. This enables the user 
to enlarge the designated viewing area. 
 
Zoom Out 
Press this key to zoom out the lens of the dome camera. This allows the user 
to get a wider range of viewing area. 
 
4.6.5   
Setting Preset Points 
The  DVR-4TH/ 8TH/ 16TH series unit allows users to set preset positions. 
The maximum amount of preset points allowed depends on the brand and 
model of the dome camera. Follow steps below to set preset points. 
 
•  Press a Channel key to view the corresponding camera in full screen. 
• Then press DOME to enter dome control mode. Then a Hint Screen, 
shown as below figure, will display on the screen. 
•  Press 2 to hide the dome control Hint Screen; press 2 again to toggle the 
Hint Screen. 
•  Use Direction keys to position the dome camera to desired position. 
 
Hint Screen 
DOME / ESC: Exit 
MODE / PLAY: Iris Open / Close 
SEQ / FREEZE: Focus Near / Far 
MENU / SEARCH: Zoom In / Out 
ENTER: Auto Focus / Iris 
←↑↓→: Pan / Tilt 
CH1: Set / Go Preset 
CH2: Hint Screen On / Off 
CH3 / CH4: Move Speed 000%