Speco Technologies 16TH User Manual

 

User’s Manual

 

 

DVR-4TH/8TH/16TH Series 
SPECO TECHNOLOGIES 07/10

 

73

This item allows the user to setup the PPPoE password. Follow these steps to 
setup the login password. 

•  Select <PPPoE Password> from LAN Setup menu and press ENTER. A 

virtual keyboard displays. 

•  Use Direction keys to select character.   
•  Press ENTER to add the selected character to the entry field. 
• When done, move the cursor to <OK> and press ENTER to save the 

settings and exit. 

 

This item indicates the time that the modem connection remains active if 
there is no acknowledgement from the remote PC. You can select the idle 
time from 0 to 600 minutes. The default is 35 minutes. 

 

 

 

 

The unit can connect to the Internet automatically when powered up. Select 
<YES> to connect at booting, otherwise select <NO>. 
 

Network restart is required after changing network settings. Select 
<Yes> to restart the network connection. After pressing ENTER, a message 
“Network restarting Please stand by” will be shown on the screen. A message 
box will be displayed within 30 seconds.   
 

Network restart…………………….….

√ 

UPnP NAT setting………..……..…….

X 

DDNS submitted………………………

√ 

WAN connection………………………

√

 

 
The “√” symbol indicates that the device is working properly whereas the “X” 
symbol indicates that the device is NOT working properly. The definitions of 
the items on the message box are described below.