Speco Technologies 16TH User Manual

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

90 

The items in the Camera Setup menu enable the user to set camera 
parameters, including camera title, dome protocol and ID for each connected 
camera. Note that there will be separated menus for analog camera and IP 
camera. Please refer to <Analog Camera> section if you are using an analog 
camera, or refer to <IP Camera> when you are using an IP camera. 
 

If you are using an analog camera, please continue with this section. Items in 
this menu are described in the following subsections.   
 

Analog Camera 

Analog Camera Select 
Dome Protocol 
Dome ID 
Camera Title 
Covert/Privacy Mask 
Termination 
Brightness 
Contrast 
Saturation 
Hue 
Audio Association 
Copy Settings 

CH01 

None 

0 

Ch1 

 

On 

0 
0 
0 
0 

Yes 

 

 

This item is used to select a camera for setting its parameters. The settings 
can be set for the selected camera are dome protocol, camera title, and etc.   
 
Move the cursor to <Camera Select> and press ENTER, then select a 
channel using UP / DOWN keys. 
 

Select the communications protocol associated with your dome camera using 
the ENTER and Direction keys.   

 

This item is used to assign an ID number to the selected dome camera. Note 
that ID number must match the ID address set by the dome.