Sony BKDW-509 User Manual

5-2

Chapter 5

Recording/Playback

Chapter 5  Recording/Playback

This section describes how to select the audio signals
for input and monitoring.

Press the AUDIO INPUT/MONITOR SELECT
buttons on the upper control panel as follows to select
the audio input signal and channels.

Selecting the audio input signals

Press the INPUT SELECT button so that it lights
up.
The AUDIO INPUT/MONITOR SELECT
button(s) light(s) up to indicate the audio input
signal type and the currently selected audio
channel.

Select the signals to be input and the channels by
pressing the following buttons:
• HD SDI CH-1 to CH-4 buttons: Select audio

input through HD SDI INPUT connector.
(Channels 1 through 4)

• AES/EBU CH-1 to CH-4 buttons:  Select audio

channels 1 to 4 input through the AUDIO INPUT
(AES/EBU) connectors.

• ANALOG CH-1 to CH-4 buttons:  Select audio

channels 1 to 4 through the AUDIO INPUT
connectors.

This setting can also be made in the VTR SETUP
menu using items 802.AUDIO INPUT SELECT
channel CH-1 through 805.AUDIO INPUT select
CH-4.

If item 701.VIDEO INPUT select in the VTR SETUP
menu is set to SDTI, the audio input signal on the
SDTI (OPTION) IN connector will automatically be
used as the input audio signal and AUDIO INPUT/
MONITOR SELECT buttons become unlit.  The SDTI
setting is operative only when the optional HKDV-
506A SDTI Board is installed.

Press the AUDIO INPUT/MONITOR SELECT
buttons on the upper control panel as follows to select
the audio signals output to the PHONES jack and the
MONITOR OUTPUT L and R connectors.

Selecting audio signals to be monitored

Press the MONITOR SELECT button so that it
lights up.
The AUDIO INPUT/MONITOR SELECT
button(s) light(s) up to indicate the audio input
signal type and the channel(s) being monitored.

Press the button(s) for the audio signal and the
channel(s) to be output to the PHONES jack and
the MONITOR OUTPUT L and/or R connector(s).

This setting can also be made in the VTR SETUP
menu using items 807.AUDIO MONITOR-L
select and 808.AUDIO MONITOR-R select.

Rotate the PHONES level control on the upper control
panel.