Sony BKDW-509 User Manual

Appendix

A-27

Appendix

The values enclosed in a box are factory settings.

401

FUNCTION MODE
AFTER CUE-UP

[stop]

still

Selects the operation mode that the VTR changes to after
completing a cue up operation.
stop: Enters stop mode.
still:  Enters still-picture mode (search mode).

When setting the standard constant on the editor and
control the unit, set to  “stop.”

403

capstan only

[reel/capstan]

CUEUP BY TC

This setting is only active when item 602. is set to TC or
UBIT.
capstan only: The tape runs with the pinch ON during cue

up. (The maximum tape speed is ten times normal tape
speed.)

reel/capstan: The tape runs with the pinch OFF state during

cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.

This setting is only active when item 602. is set to CTL.
capstan only: The tape runs with the pinch ON state during

cue up. (The maximum tape speed is ten times normal
tape speed.)

reel/capstan: The tape runs with the pinch OFF state during

cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.

When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the seting is “reel/capstan”, cue up
operations are done at high speed.

Select “capstan only” when editing precision has priority.

CUEUP BY CTL

404

[capstan only]

reel/capstan

405

CUE MENU
DEFAULT MODE
select

[page mode]

extend mode

Selects the default mode when the CUE menu is opened.
page mode: PAGE mode
extend mode: EXTEND mode

406

CUE MENU
PREROLL
OFFSET

[0 sec]

...

30 sec

Sets the preroll time for a cueing up operation from the
CUE menu.

407

AUTO REWIND

[off]

on

Selects the rewind mode for the end of the tape.
off: The tape transport stops at the end of the tape.
on: The tape is automatically rewound from the end of the

tape.