Sony BKDW-509 User Manual
Chapter 4
Menu Settings
4-33
Chapter 4 Menu Settings
4-3-14 Presetting for Conversion
From 25-frame Into 24-frame
Time Code (TCCONV MENU)
From 25-frame Into 24-frame
Time Code (TCCONV MENU)
When the VTR is operated in 23.98PsF/24PsF mode,
follow the steps below to make the settings for 24-
frame converted time code.
follow the steps below to make the settings for 24-
frame converted time code.
1
Press the TC button, and then press the ALT
button.
The ALT+TC menu appears.
button.
The ALT+TC menu appears.
2
Press the [F3] (TCCONV MENU) button.
The TC CONVERT menu appears.
The TC CONVERT menu appears.
25F STARTING TC: Time code used as a reference
when converting 25-frame time code into 24-
frame time code.
frame time code.
25F JUMPING TC: The loopback point for
converting 25-frame time code to 24-frame time
code with 25F STARTING TC as the reference
and the conversion done in both forward and
reverse directions. Note that the part of the 24-
frame time code before 25F JUMPING TC is not
consecutive with the part after 25F JUMPING TC.
code with 25F STARTING TC as the reference
and the conversion done in both forward and
reverse directions. Note that the part of the 24-
frame time code before 25F JUMPING TC is not
consecutive with the part after 25F JUMPING TC.
The table below shows an example of how the 24-
frame time code is not consecutive when 25F
STARTING TC is set to 01:00:00:00 and 25F
JUMPING TC is set to 22:00:00:00 (i.e., JUMP TC
SEL is set to –3H).
frame time code is not consecutive when 25F
STARTING TC is set to 01:00:00:00 and 25F
JUMPING TC is set to 22:00:00:00 (i.e., JUMP TC
SEL is set to –3H).
25 Frames TC 24 Frames TC
JUMPING TC
22:00:00:00
22:52:30:00
:
:
01:00:01:24
01:00:01:00
01:00:00:23
01:00:00:23
:
:
STARTING TC
01:00:00:00
01:00:00:00
00:00:59:24
00:00:59:23
:
:
22:00:00:01
21:52:30:01
JUMPING TC
22:00:00:00
22:52:30:00
3
If necessary, use the function buttons to change the
settings.
For details on the settings made by these buttons,
see the table below.
settings.
For details on the settings made by these buttons,
see the table below.
TC CONVERT menu
Forward direction
Reverse direction
Non-consecutive
part
part
>
>
Button
Function
Indication
[F3]
TC CONV
Specifies whether the time code
is converted to 24-frame time
code or not.
is converted to 24-frame time
code or not.
[F4]
ORG TC DISP
Specifies whether the 25-frame
time code is displayed or not on
two lines in the HOME, TC, and
PF menus along with the
converted time code.
time code is displayed or not on
two lines in the HOME, TC, and
PF menus along with the
converted time code.
[F6]
START TC
PST
PST
Press to preset the 25F
STARTING TC using the
numeric buttons.
STARTING TC using the
numeric buttons.
[F7]
START TC
ENT
ENT
Press to enter the current time
code as the 25F STARTING
TC.
code as the 25F STARTING
TC.
[F8]
JUMP TC SEL
Selects the 25F JUMPING TC
as an interval from 25F
STARTING TC.
Selectable values: –3H, –2H, –
1H, +1H, +2H, +3H, 0H
as an interval from 25F
STARTING TC.
Selectable values: –3H, –2H, –
1H, +1H, +2H, +3H, 0H
[F10]
EXIT
Select to exit the TC CONVERT
menu.
menu.
1
2
3
C H . C O N D
G R E E N
T C C O N V E R T
2 5 F S T A R T I N G T C
00
Ó
00
µ
00
ß
00
ƒ
2 5 F J U M P I N G T C
21
Ó
00
µ
00
ß
00
ƒ
2 5 F C U R R E N T T C
00
Ó
00
µ
00
ß
00
ƒ
O R G T C
D I S P
T C
C O N V
R E M A I N - T
L 1 1 3 m i n
S T A R T
T C P S T
E X I T
S T A R T
T C E N T
J U M P
T C S E L
- 3 H
o n
o n
T C R 0 0 : 0 0 : 0 0 : 0 0