Nortel Networks 1140E User Manual
Terms you should know
169
Terms you should know
Calling Party Name Display
Information appearing on the LCD display screen, such as the
caller’s name and phone number. The system must have CPND
enabled.
caller’s name and phone number. The system must have CPND
enabled.
Category 5 (Cat5)
Cable and associated connecting hardware capable of
transmitting at speeds up to 100 MHz, used by 10BaseT,
100BaseT4, 100BaseTX.
transmitting at speeds up to 100 MHz, used by 10BaseT,
100BaseT4, 100BaseTX.
Category 5e (Cat5e)
Most Cat5 cable manufactured after 1996 also supports
1000BaseT (GigE) installations, and is designated Cat 5e. Cat5e
cable normally has four pairs of copper wire.
1000BaseT (GigE) installations, and is designated Cat 5e. Cat5e
cable normally has four pairs of copper wire.
Category 6 (Cat6)
Cable and associated connecting hardware capable of
transmitting at speeds up to 200 MHz. Designed specifically to
support 1000BaseT (GigE), it is also compatible with 10BaseT,
100BaseT4, and 100BaseTX installations. The cable normally
has four pairs of copper wire.
transmitting at speeds up to 200 MHz. Designed specifically to
support 1000BaseT (GigE), it is also compatible with 10BaseT,
100BaseT4, and 100BaseTX installations. The cable normally
has four pairs of copper wire.
Communication Server 1000
Your office communication system.
Context-sensitive soft keys
A set of keys programmed by your system administrator. These
four keys, located directly below the display area, have four
programmable layers. These keys are also used to configure
parameters in the
four keys, located directly below the display area, have four
programmable layers. These keys are also used to configure
parameters in the
Telephone Options
menu.
Date/time display
The current date and time when the IP Phone is in an idle state.