Sony PEGA-VR100K Manual

39

Operations

HQ (High Quality)

SP (Standard Play)

LP1 (Long Play 1)

LP2 (Long Play 2)

Follow the procedure below to record a TV program without setting the
timer REC preset.

Press 

1

 (power) on the Video Recorder.

The POWER indicator blinks momentarily and then stays lit in green.

Insert a “Memory Stick” media into the “Memory Stick” slot of
the Video Recorder and press CHANNEL+/– to select the
channel or input source you want to record.

z

When you record from other equipment connected to the LINE IN jacks on the
Video Recorder, select LINE using CHANNEL+/–.

Press DISPLAY to select the recording mode.

Each time you press CHANNEL+, the front panel display changes in
the following sequence.

•  When you select LP1 or LP2, the sound will be recorded in monaural. When you

record a stereo sound program, it is recorded in mono (L+R). When you select
LP1 or LP2, you cannot select the sound format.

•  You cannot select SAP (Second Audio Program) manually.

Press 

z

 REC.

Recording starts and the REC indicator lights up in red.
Recording continues until you stop the recording or when the
“Memory Stick” media is full.

z

The maximum recording time is two hours.

While recording, you cannot change [REC Mode].