NEC DS1000 User Manual
Feature Operation
DS1000/2000 Cordless Telephone User Guide
Chapter 2: Features
◆ 35
2
Tandem Trunking
Tandem Trunking is disabled by default.
To set up a tandem call (Unsupervised Conference):
1.
Place or answer an outside call.
2.
Press
CONF
.
3.
Place or answer another outside call.
4.
Press
CONF
+
TALK
to hang up.
- You can optionally press
HOLD
to place the Conference on Hold. Press one of the line keys +
CONF
to reinstate the tandem call.
To disconnect a tandem call (using Forced Trunk Disconnect):
1.
Press line key for busy line (or use Direct Line Access) +
#
to disconnect the line.
To Barge In on a tandem call:
- Use this procedure to rejoin a Conference already in progress.
1.
Press line key for busy line (or use Direct Line Access) +
4
to Barge In.
Transfer
Transfer is enabled by default.
To Transfer your call:
1.
Do not hang up.
2.
Press
TRANSFER
.
3.
Dial your co-worker’s extension number.
- You can also Transfer the call to a Ring Group or UCD Group master number.
4.
Announce the call + Press
TALK
to make a Screened Transfer.
OR
Press the flashing line key to return to the call if your co-worker doesn’t want it.
OR
Press
Press the flashing line key to return to the call if your co-worker doesn’t want it.
OR
Press
TALK
to send the call through unscreened.
To Transfer your call to a co-worker’s mailbox:
1.
Do not hang up.
2.
Press
TRANSFER
+ Dial your co-worker’s extension.
3.
Dial
8
.
- To Transfer the call to your own mailbox, press your own Message Center key.
4.
Press
TALK
to hang up.