Sony STR-DB798 User Manual
O
ther O
p
e
ratio
ns
masterpage:Right
lename[E:\SEM_Janet\Revision
Data\J9051275_2598516131DB798CEL\2598516131\GB070TH_STR-DB798-CEL.fm]
47
GB
model name1[STR-DB798]
[2-598-516-13(1)]
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
Select the program source to be
recorded.
recorded.
2
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
record into VCR.
3
Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
(VIDEO 1 or VIDEO 2) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
then start playing the video tape or
DVD you want to record.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1
AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
• Make sure to make both digital and analog
connections to the TV/SAT and DVD inputs. Analog
recording is not possible if you make only digital
connections.
recording is not possible if you make only digital
connections.
• The analog audio signals of the current input are
output from the VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks.
AUDIO OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks even when MULTI CH IN is
being used. The analog audio signals of the current or
previously used input are output.
AUDIO OUT jacks even when MULTI CH IN is
being used. The analog audio signals of the current or
previously used input are output.
GB01COV_STR-DB798-CEL.book Page 47 Thursday, August 18, 2005 8:59 AM