Pioneer PDP-614MX User Manual

En

Connect the included power cord here.

Connect speakers (optional) here. Maintain the correct
polarity. Connect the 

 (positive) speaker wire to the

  EXT  SPEAKER  terminal  and  the 

  (negative)

speaker wire to the 

 EXT SPEAKER terminal on

both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual.

Connect VCR’s, DVD’s or Video Cameras, etc. here.
VIDEO1  can  be  used  for  Input  or  Output  (see  page
24).

These are audio input terminals.
The input is selectable. Set which video image to allot
them from the SOUND menu screen.

Connect DVD’s, High Definition or Laser Discs, etc.
here.

PC2:

You can connect an analog RGB signal
and the syncronization signal.

COMPONENT2: You  can  connect  DVDs,  High

Definition  sources,  Laser  Discs,  etc.
here.
This input can be set for use with an
RGB  or  component  source  (see  page
17).

Connect an analog RGB signal from a computer, etc.
here. This input can be used for Input or Output (see
page 24).

Connect a digital signal (TMDS) from a source with a
DVI output.

RS-232C
Never  connect  any  component  to  this  connector
without  first  consulting  your  Pioneer  installation
technician.
This  connector  is  used  for  plasma  display  setup
adjustments.

Connect  the  remote  cable*  to  the  remote  control’s
remote jack to obtain wired remote control.

Connect the remote cable* to the REMOTE IN jack of
the  other  display  monitor  to  obtain  wired  remote
control.

* The 1/8 Stereo Mini cable must be purchased separately.

En

q POWER ON/STANDBY

Switches the power on/standby.
(This does not operate when STANDBY/ON indicator
of the main unit is off.)

w RGB/PC

Press this button to select RGB/PC as the source.
RGB/PC can also be selected using the INPUT/EXIT
button on the monitor.

e COMPONENT

Press this button to select COMPONENT as the source.
COMPONENT can also be selected using the INPUT/
EXIT button on the monitor.

r VIDEO

Press this button to select VIDEO as the source.

VIDEO can also be selected using the INPUT/EXIT
button on the monitor.

t MENU/SET

Press this button to access the OSD controls.
Press this button during the display of the main menu
to go to the sub menu.

y CURSOR (▲ / ▼ / 



 / 



Use  these  buttons  to  select  items  or  settings  and  to
adjust settings.

u EXIT

Press this button to exit the OSD controls in the main
menu. Press this button during the display of the sub
menu to return to the previous menu.

i POINT ZOOM

Press this button to display the pointer.

o ZOOM (+ /–)

Enlarges or reduces the image.

!0 VOLUME (+ /–)

Adjusts the sound volume.

!1 MUTING

Mutes the sound.

!2 SCREEN SIZE

Automatically detects the signal and sets the aspect ratio.
SCREEN SIZE button is not active for all signals.

!3 DISPLAY

Displays the source settings on the screen.

!4 OFF TIMER

Activates the off timer for the unit.

!5 AUTO SET UP

Press this button to adjust PHASE, CLOCK, Position,
and Contrast automatically, or to switch the screen size
to ZOOM mode automatically with the superimposed
caption displayed fully only when the picture contains
dark areas above and below the picture.

!6 ID NO. SET

Set the ID number in the remote control. The remote
control can then be used only for a display with the
same  ID  number.  When  several  displays  are  used
together they can be controlled individually.

!7 CLEAR

Clears the number set by the ID NO. SET button.

!8 Remote control signal transmitter

Transmits the remote control signals.

!9 Remote Jack

Insert  the  plug  of  the  remote  cable  (The  1/8  Stereo
Mini  cable)  here  when  using  the  supplied  remote
control in the wired condition.

A VIDEO1 A VIDEO2 A VIDEO3