Sony KDE-50XS955 User Manual

The remote control is preset to operate Sony brand video equipment.

If you have video equipment other than Sony brand that you want to control 
with the TV’s remote control, use the following procedures to program the 
remote control.

From the “Manufacturer’s Codes” listed on page 59, select the three-digit 
code number for the manufacturer’s code of your equipment. If more than 
one code number is listed, try entering them one by one until you come to the 
correct code for your equipment. Use the code number to complete the 
following procedure.

Press the 

DVD/VCR (FUNCTION)

 and 

RESET

 buttons 

simultaneously, or press the 

SAT/CABLE (FUNCTION)

 and 

RESET

 

buttons simultaneously. DVD/VCR and SAT/CABLE buttons flash.

Press the function button you want to program.
To program a cable box or a satellite receiver
Press 

SAT/CABLE (FUNCTION)

.

To program video equipment
Press 

DVD/VCR (FUNCTION)

.

Enter the three-digit manufacturer’s code number using the 

0-9

 buttons.

Press 

ENT

.

To check if the code number works, aim the TV’s remote control at the 
equipment and press 

DVD/VCR

 and/or 

SAT/CABLE (POWER)

 that 

corresponds with that equipment. If it responds, the programming is 
completed. If not, try using the other codes listed for that manufacturer.

DVD/VCR

601 (Sony Dream System)

SAT/Cable

801 (Sony Satellite Receiver)

5

3

4

1, 2

1