Samsung SLM3320NDXAA User Manual

 

•

You cannot connect your mobile device to the internet through the 
printer’s Wi-Fi Direct.

•

The supported protocol list may differ from your model, Wi-Fi Direct 
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP 
services. 

•

The maximum number of devices that can be connected via Wi-Fi Direct 
is 3.

 

You can enable Wi-Fi Direct feature by one of the following methods.

After the driver installation is complete, Samsung Easy Printer Manager can be 

set and changes in the Wi-Fi Direct can be made.

 

Samsung Easy Printer Manager is Available for Windows

and Mac OS users only.

 

-

From the Start menu, select Programs or All Programs > Samsung 
Printers > Samsung Easy Printer Manager > Device Settings > 
Network.

▪

Wi-Fi Direct On/Off: Select On to enable.

▪

Device Name: Enter the printer’s name for searching for your 
printer on a wireless network. By default, the device name is the 
model name.

▪

IP Address: Enter the IP address of the printer. This IP address is 
used only for the local network and not for the infrastructure wired 
or wireless network. We recommend using the default local IP 
address (the default local IP address of the printer for Wi-Fi Direct is 
192.168.3.1 )

▪

Group Owner: Activate this option to assign the printer the Wi-Fi 
Direct group’s owner. The Group Owner acts similar to a wireless 
access point. We recommend activating this option.

▪

Network Password: If your printer is a Group Owner, a Network 
Password is required for other mobile devices to connect to your 
printer. You can configure a network password yourself, or can 
remember the given Network Password that is randomly generated 
by default.

 

Accessing menus may differ from model to model (see "Accessing the 
menu" on page 30 ).

 

•

Select (Menu) > Network > Wi-Fi > Wi-Fi Direct on the control panel.

•

Enable Wi-Fi Direct.