Vidikron VL-46 User Manual
40
Vidikron VL-40 and VL-46 Owner’s Operating Manual
PRE
L
IMINAR
Y
• Movie Rating: Select Movie Rating from the Parental Control menu to block movies
carrying a given rating, to prevent children from watching movies that are deemed
inappropriate. These ratings have been established by the Motion Picture Association of
America (MPAA) to help parents and other caregivers determine if a movie is suitable for
young viewers.
inappropriate. These ratings have been established by the Motion Picture Association of
America (MPAA) to help parents and other caregivers determine if a movie is suitable for
young viewers.
To block movies carrying a given rating, press the right-arrow button to require the PIN
code to be entered to view a movie with that rating. A lock icon ( ) appears to indicate
that the restriction is active.
code to be entered to view a movie with that rating. A lock icon ( ) appears to indicate
that the restriction is active.
• Unrated: To allow or block access to unrated content, select Unrated from the Parental
Control menu and select Allow or Block. Press ENTER to confirm your choice.
• Change PIN: The default PIN for accessing the parental controls or bypassing content
restrictions is 0000. Vidikron recommends changing this to something less obvious.
Letterbox Mode: Select Letterbox Mode from the
Setup menu to change the zoom factor that takes effect
when you select the Letterbox aspect ratio (refer to
Table 4-1).
Setup menu to change the zoom factor that takes effect
when you select the Letterbox aspect ratio (refer to
Table 4-1).
When you select Letterbox, the image is enlarged
(zoomed in) by a factor of approximately 1.33.
(zoomed in) by a factor of approximately 1.33.
When you select Cinema Fill, the zoom factor is
approximately 1.77 (1.33 x 1.33).
approximately 1.77 (1.33 x 1.33).
Input Selection: Input 1 and Input 2 have both S-Video and Composite video connectors.
Input 3 and Input 4 have both Component and Composite video connectors. To specify
which connection type you are using – or to switch from one to the other if equipment is
connected to both – select Input Selection from the Setup menu and press ENTER.
Input 3 and Input 4 have both Component and Composite video connectors. To specify
which connection type you are using – or to switch from one to the other if equipment is
connected to both – select Input Selection from the Setup menu and press ENTER.
The default setting for all four AV inputs is Automatic. With this setting, the DView searches
for an active source on both connectors and displays the first one it detects. If equipment is
connected to both, Automatic input selection triggers a switch when a source component is
disconnected or powered off.
for an active source on both connectors and displays the first one it detects. If equipment is
connected to both, Automatic input selection triggers a switch when a source component is
disconnected or powered off.
Monitor Out: If you have equipment connected to the AV OUT, select Monitor Out from the
Setup menu to route either the main or PIP audio/video signals to that output.
Setup menu to route either the main or PIP audio/video signals to that output.
4:3 Image on
16:9 Display
(Letterbox aspect ratio)
Letterbox Mode = Letterbox
4:3 Image on
16:9 Display
(Letterbox aspect ratio)
Letterbox Mode = Cinema Fill