Toshiba 42L6200U User Manual
33
Connecting Your TV
Connecting remote IR devices
❖
Dual-wand IR blaster cable (see
)
❖
Other cables as required to connect the device(s) to the TV (see
)
See the remote IR blaster setup section.
To connect the IR blaster cable:
1
Locate the infrared sensor on the front of your device. This
sensor is marked on some devices.If you are having issues
locating the device's infrared sensor, see
sensor is marked on some devices.If you are having issues
locating the device's infrared sensor, see
2
Align one of the IR blaster cable’s wands approximately 1 inch
away from the infrared sensor on the front of the device and
attach it using double-sided mounting tape. If you have a
second device, attach the second wand in a similar manner.
away from the infrared sensor on the front of the device and
attach it using double-sided mounting tape. If you have a
second device, attach the second wand in a similar manner.
If you do not have a second device, coil the second wand with a
rubber band and leave it behind the TV.
rubber band and leave it behind the TV.
3
Plug the IR blaster cable’s plug into the TV’s IR Blaster Out
terminal.
terminal.
(Sample Illustration) L6200U/L7200U Series—Using the IR blaster
OUT terminal
OUT terminal
NOTE
Front of IR-controlled DVD player (for example)
Front of IR-controlled audio device (for example)
IR blaster cable wand
(approx.1 inch from device)
(approx.1 inch from device)
TV back panel
Infrared
sensor
sensor
Dual-
wand IR
blaster
cable
wand IR
blaster
cable