Pioneer VSX-D909S User Manual
25
PREP
ARA
TION
Displays & Controls
Display
All the display information is explained and/or referenced here.
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are
assigned.
DIGITAL: Lights when digital audio signals are
selected.
AUTO: Lights when the receiver is set to select
the input signal automatically.
assigned.
DIGITAL: Lights when digital audio signals are
selected.
AUTO: Lights when the receiver is set to select
the input signal automatically.
2 Program Format indicators
AC-3: Lights when a source with Dolby Digital
signals is played.
DTS: Lights when a source with DTS audio signals
is played.
For Dolby Digital or DTS sources: These
indicators change according to which channels are
active in the source.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
signals is played.
DTS: Lights when a source with DTS audio signals
is played.
For Dolby Digital or DTS sources: These
indicators change according to which channels are
active in the source.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators
OVER – When the source signal is analog, this
lights if the signal is in danger of distorting. Press
INPUT ATT on the remote control to lower the
signal level.
ATT – Lights when INPUT ATT is used to reduce
the level of the analog source signal.
lights if the signal is in danger of distorting. Press
INPUT ATT on the remote control to lower the
signal level.
ATT – Lights when INPUT ATT is used to reduce
the level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
and/or B.
5 LOUDNESS indicator (See p.49)
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
PHONES jack (speakers systems A and B both
turn off automatically).
DIGITAL
dB
PRO LOGIC
STEREO
DSP
MIDNIGHT
LOUDNESS
ATT
SIGNAL
SELECT OVER
H.P
AC-3DTS
ANALOG SP
AB
L
C
R
LFE
LS
S
RS
DIGITAL
AUTO
TAPE 2
VOLUME
MONO STEREO
TUNED AMFM
TUNED AMFM
2
1
3 4 5
6
7
8
9
10
11
12
13
14
15
7 MIDNIGHT indicator (See p.49)
Lights when the MIDNIGHT LISTENING mode
is on.
is on.
8 DSP indicator (See p.41-45, 47)
Light when a DSP or Advanced Theater mode
is selected.
is selected.
9 STEREO indicator
Lights when a STEREO mode is selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the
current radio station.
current radio station.
11 2/dts mode indicators
2
DIGITAL : When the
2
/dts mode on the
receiver is on, this indicator lights to indicate
playback of a Dolby Digital signal. However,
playback of a Dolby Digital signal. However,
2
PRO LOGIC lights during 2 channel playback of
Dolby Digital.
Dolby Digital.
2
PRO LOGIC: When the
2
/dts mode on the
receiver is on, this indicator lights during 2 channel
playback.
DTS : When the
playback.
DTS : When the
2
/dts mode on the receiver is
on, this indicator lights to indicate playback of a
DTS signal.
DTS signal.
12 MASTER VOLUME indication
Displays current volume level.
13 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
14 Character display
Shows current mode, status, etc.
15 Tuner indicators
MONO: Lights when the tuner is set to receive
FM broadcasts and when selected MPX mode.
STEREO: Lights when a FM stereo broadcast is
received in the auto stereo mode.
TUNED: Lights when a broadcast is received.
AM/FM: Light to indicate the current band (FM or
AM).
FM broadcasts and when selected MPX mode.
STEREO: Lights when a FM stereo broadcast is
received in the auto stereo mode.
TUNED: Lights when a broadcast is received.
AM/FM: Light to indicate the current band (FM or
AM).