Technicolor - Thomson EFC031 User Manual
Operation
10
EN
Setting the time
The
TIME menu can be used to set the time on the TV set and program the automatic sleep timer or wake-up timer
functions.
Display the
OVERVIEW menu by pressing the
MENU
button. Select the
Time option and press
OK
to confirm.
Setting the time
1.
Select the
Time reference option.
2.
Enter the number of the channel which the time will use as a reference point, or select it from the list using the
or
PR
+/
PR
- buttons.The time is displayed after a few seconds if it is available on the selected channel.
If the time is not provided by the channel selected under the
Time reference option, this means the time is not set.
In this case, the setting
-- is automatically selected under the Time option. To set the time manually, select the Time
option and enter the time using the numeric or
buttons.
If the date is not supplied by the channel selected on the
Time reference line, the date is not adjusted.The --/--/--
setting is automatically preselected on the
Date line.To enter a date manually, select the Date line and use the number
keys.
Note: if the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will
disappear if it has been entered manually.You must reset it. We therefore recommend you find the time on a channel and check that it is correct.
disappear if it has been entered manually.You must reset it. We therefore recommend you find the time on a channel and check that it is correct.
Once you have set the time, you can use the
Wake up timer and Turn off timer functions.
Calendar
This function is used to display the calendar.
1.
Select the
Calendar line.
2.
Press the
button to bring up the calendar.
3.
Successively select the
Month and Year lines and use the
buttons to select the current month and year.
Please note: you can set the calendar to any year between 1880 and 2099.
4.
The
Today line lets you bring back the display to the current month.To do so press the
buttons or the
OK
button.
This line is only active if the date has been set in the
TIME
menu.
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the television to wake you up.
1.
Select the
Wake up timer line and select Once to be woken-up a single time or Daily to be woken up at the same
time every day.
Note: to deactivate wake-up, select the
Off
option.
2.
Under the
Wake up time option enter the wake-up time using the numeric or
buttons.
3.
Under the
Wake up channel option enter the number of the channel you want to wake you using the
or
numeric buttons.
Note: if you have programmed a wake-up and are not there when the appliance comes on, it will automatically switch off after two hours if no
activity using the buttons on the front of the set or the remote control has been detected.
activity using the buttons on the front of the set or the remote control has been detected.
Schedule automatic shut-off
This function lets you set a time when the appliance will switch itself off.
1.
Select the
Turn off timer line then select Once for a single stoppage or Daily for shut-off at the same time every
day.
Note: to deactivate automatic shut-off, select the
Off
option.
2.
On the
Turn off time line, enter the shut-off time using the number buttons or the
buttons.
Programme a sleep time
This function is used for setting a sleep timer.
1.
Select the
Sleep timer line.
2.
Using the
buttons, set how long the TV set must wait before automatically going into standby mode (from 0:15
hours to 4:00 hours in 15 minute intervals).To deactivate this function, set it to
Off
.
06-EFC031-EN.qxd 4/07/05 18:45 Page 10