Curtis LCD 1922A User Manual

 

- 2 -

 

 

For ventilation, leave a space of at least 10cm free all around the set. To prevent any 

fault and unsafe situations, please do not place any objects on top of the set. Use this 

apparatus in moderate climates.   

The TV set should be operated only from a 120 V AC, 60Hz outlet. Ensure that you select the correct voltage setting for your 

convenience. 

place the TV where the power cord is subject to wear or abuse, pinch, bend or twist the cord 

excessively. The cord lines may be bared and cut, and cause a short-circuit, resulting in a fire or an 

electric shock. Do not convert or damage the power cord. Do not allow anything to rest on or roll over 

the power cord. Do not move the TV with the power cord plugged in. Keep the power cord away from 

heat sources. Be sure to grasp the plug when disconnecting the power cord. 

 

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, 

and near the washing machine). Do not expose this equipment to rain or water, as this may be 

dangerous and do not place objects filled with liquids, such as flower vases, on top. Avoid from 

dripping or splashing. If any solid object or liquid falls into the cabinet, unplug the TV and have it 

checked by qualified personnel before operating it any further. 

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use 

soft and dry cloth. 

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, 

these openings must not be blocked or covered in anyway. 

The set should not be placed near to naked flames and sources of intense heat, such as an electric 

heater. Ensure that no naked flame sources, such as lighted candles, are placed on top of the TV. 

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.