Venturer PLV36190S5W User Manual

19

If you reset the TV to the factory settings, all your present settings on picture & sound will be
erased and replaced by the factory’s default settings. However, picture setting in PC mode and
parental setting will not be erased.

This feature allows reception of sound other than the main audio for the program.
1. Press the MENU button.
2. Use the

 or

button to select the TV setting menu, then press the 

 button to confirm the

setting.

3. Use the

 or

button to select MTS menu, and press the   or  button to select the options

4. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote

control.

Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station

to broadcast other information, which could be audio in another
language.

1. Press the MENU button.
2. Use the 

 or 

 button to select the TV setting menu, then press the 

 button to confirm

the setting.

3. Use the 

 or 

 button to select the Channel no. setting and use the   or 

 button to

change the channel no.

4. Use the 

 or 

 button to select the Tuning mode and use the   or   button to change from

AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).

5. Use the 

 or 

 button to select the Auto tune and press the    or 

 button to confirm the

selection.  The unit will immediately search through all possible TV channels and store
those channels with signals in memory.  After this is complete, the unit will switch to the
first channel found.

6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : This option is available in TV mode only.

Remarks:
Channel no. : 2-69 channel for Air mode, 1-125 channel for Cable

mode.

Tuning mode : Air or Cable mode are available.
Auto tune

: Searches for usable stations and stores them in

memory.

: ON - Skip weak channels.  OFF - No channel skip.

: The frequency changes to allow fine tuning.

: Auto frequency control.

: Select the Mono sound/Stereo sound/Secondary

Audio Program (SAP). Refer to the section titled
“MTS SETTING” for instructions.

PLV36190_ib_eng_15-20_wDVI.pmd

18/01/2007, 17:03

19