Curtis LCD2424A User Manual

17

16

ANTENNA CONNECTION

■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.

■To prevent the equipment damage, never plug in any power cords until 
  you have finished connecting all equipment.

■In poor signal areas, to get better picture quality, install a signal amplifier 
  to the antenna as shown below.
■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

S-VIDEO CONNECTION

1. Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
2. Connect the audio outputs of the DVD to the Audio Input (L/R) jacks on the set.
3. Turn on the DVD player, insert a DVD
4. Select S-VIDEO source with using the SOURCE/       button on the remote control.
5. Refer to the DVD player's manual for operating instructions

When connecting with a S-Video cable (cable not included)

DVD

1. Connect the AV jacks between TV and external equipment. Match the jack colors 
  (Video = yellow, Audio Left = white, and Audio Right = red).
2. Select AV source with using the SOURCE/       button on the remote control.
3. Operate the corresponding external equipment. Refer to external equipment 
  operating guide.

EXTERNAL EQUIPMENT CONNECTIONS

V i deo G ame S et

P H ILI P S

P H ILI P S

DR IV E

DR IV E

TU RB O

TU RB O

C amco r d e r

AV