Memorex MLT1522 User Manual

Adjust the volume level by pressing the VOLUME

UP/Navigation Right 1 or VOLUME DOWN/Navigation Left
2

button. The volume level will be indicated on the screen

by a green bar.

For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 19-20.
Press and release the CHANNEL/Navigation UP 1 or

DOWN  2 button. The TV automatically stops at the next

channel set into memory. This will not operate if channels

are not set into memory.

Direct Program Selection buttons (0-9) 3.

Use these buttons to select a channel. The channel number

will appear at the top right corner of the screen.

• For Channels 01 through 99, press the two digits in order.

• For Channels 100 through 125, press the 1-- button 4,

then the remaining two digits.

Set the AirTV/CATV (CABLE) option and set the channels

into memory as described on pages 19 and 20.

Press the POWER button 1 to turn on the TV; the

POWER indicator will light orange. Press the TV/VIDEO

button 2 repeatedly to select the TV mode.

AirTV: If using a

VHF/UHF

antenna.

CATV: If using Cable

TV.

• When AIR/CATV is set to AIR, only channels up to 69

can be selected. When set to CATV, channels up to

125 can be selected.

• If an invalid channel is selected, the display will revert

to the original channel.

TV SETUP option must be set to CATV when using cable, see page 19.

You must subscribe to these channels through your cable company.