Vidikron VL-26HD User Manual

1.

Turn on your source components.

2.

Plug the female end of the power cord into the AC receptacle on the rear of the DView 
(AC 100V ~ 240V).

3.

Connect the other end to your AC power source. 

4.

Turn on the main power switch at the rear of the display (VL-32 only). 

5.

The power indicator lights red to indicate that the DView is in “standby” mode.

6.

Press the ON button on the remote control to 
turn on the display (or press the power button 
on the front of the display). The power indicator 
flashes for a few seconds, then lights solid 
green.

7.

After a brief warm-up period (approximately 10 
seconds), the DView will display an image.

The DView OSD language is initially set to English, but can also display the menus in French, 
Spanish, Portuguese or German. To change the OSD language:

1.

Press MENU.

2.

Select Setup from the Main Menu.

3.

Select OSD Language from the Setup Menu.

4.

Press 

 or 

 to highlight the desired language and press ENTER. The change takes 

effect immediately. 

To maximize image quality when using the DView with a personal computer, you may need 
to adjust the display properties of your PC video card. To do this: 

1.

Choose Settings from the Windows Start 
menu and click on “Control Panel.”  

 

 

 

 

 

 

 

 

 

 

 

4

OFF

ON