Vidikron VL 52 User Manual

Page of 72
Vidikron VL-52 and VL-57 Installation/Operation Manual
15 
PRE
L
IMINAR
Y
3.3 
Installation Considerations
Proper installation of your DView will ensure the highest possible picture quality. Whether 
you are installing the DView temporarily or permanently, you should take the following into 
account to ensure that it performs optimally.
Wall-Mounting the DView
You can either place the DView on a table or in an entertainment center, or mount it on a 
wall. 
If you do decide to wall-mount the DView, ensure that the wall-mount bracket is installed 
according to the instructions included with it. The wall must be capable of supporting a 
redundant weight factor three (3) times the weight of the display, or be reinforced. 
Vidikron recommends that this be done by a custom installation specialist. 
Ambient Light
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your 
images will be noticeably reduced if light directly strikes the display, such as when a shaft of 
light from a window or floodlight falls on the image. Images may then appear washed out 
and less vibrant.
Other Considerations
Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the display away 
from heating and/or air conditioning vents. Changes in temperature may cause drifts in 
the display circuitry, which may affect performance.
• Keep the DView away from devices that radiate electromagnetic energy such as motors 
and transformers. Common sources of these include slide projectors, speakers, power 
amplifiers and elevators. 
3.4 
Connections to the DView
Proceed as follows to connect the DView to your video sources, external controller(s) – if 
present – and AC power. 
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors 
that have them. 
• Use the left audio input when connecting mono audio sources.
Use only the Vidikron-approved wall-mount kit designed for your display.
Note