Emerson EWL3706 User Manual
30
EN
4
Display the “New Password” screen.
• Using [K /L], select “New Password”.
• Press [ENTER].
5
Change the password.
• Use [the Number buttons] on the remote con-
trol and enter the NEW 4-digit password.
• Enter password again in “Confirm password”
space.
6
To exit the setup, press [SETUP].
NOTES:
• Make sure to enter the exact same new password as the
“Confirm password.”. If they are different, the space is
cleared for reentering.
cleared for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs or when you turn off the
power using a wall switch. If you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
power using a wall switch. If you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
V-Chip
V-Chip
PIN Code
Back
BACK
Confirm password.
Enter password.
V-Chip
V-Chip
MPAA Rating
TV Rating
New Password
C New Password
HDMI AUDIO
Set the method of sound input for HDMI jack.
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select “DETAIL” and press [ENTER] to confirm.
• Using [K /L], select “HDMI Audio” and press
[ENTER] to confirm.
3
Switch the HDMI Audio.
• Using [K /L], select the desired HDMI Audio,
then press [ENTER].
• Select “Auto” if you connected to both digital
device with HDMI jack and analog device for
audio sources. Digital audio input signal has
priority in this setting.
audio sources. Digital audio input signal has
priority in this setting.
• Select “Digital” if you connected to digital
device with HDMI jack for digital audio input
signal.
signal.
• Select “Analog” if you connected to analog
device with analog jacks for analog audio input
signal.
signal.
4
To exit the setup, press [SETUP].
Detail
Detail
Closed Caption
Auto
Digital
Analog
V–chip
HDMI Audio
Detail
Detail
Auto
Closed Caption
V–chip
HDMI Audio
ENTER
STILL
SETUP
BACK
SCREEN
MODE
INFO
-
0
ENTER
SETUP