Elo TouchSystems ET5501L User Manual

User Manual: Interactive Digital Signage 

SW601990 Rev E, Page 17 of 36 

 

 
 
 
 
 

Video Settings, Audio Settings, Color Settings and Other Settings can be selected 

Video Source, Brightness, Contrast, Black Level, Sharpness and Aspect Ratio are 
available in this menu.   

Video Source  Allows the user to switch between the available video sources. 

Allows the user to toggle the mute setting. Also, the volume of the internal speakers or 
headphones can be adjusted. 
Default: Not Muted, Volume at 50 

Displays the Color Adjust and Color Preference Menus 

Allows HDMI video to be displayed on the monitor 

Allows VGA video to be displayed on the monitor 

Allows DisplayPort video to be displayed on the monitor 

ECM DP – DisplayPort is the standard video output of Elo Computer modules. If 
HDMI video input is found, the video source can be switched. 

The monitor continually scans for active video from VGA, DisplayPort, HDMI, and the 
Computer Module. This adjustment selects which of those input ports should be 
displayed. 
 
If an Elo Computer Module or Intel OPS computer module has been detected, video 
priority is given to the computer module before any of the external sources.   

Increase/decrease monitor brightness. 
Default: 65 

Increase/decrease monitor contrast. 
Default: 50 

Allows user to change the H. position, V. position, Clock and Phase. 
If VGA is selected, the Auto-Adjust feature is available. 

Adjusts sharpness of the displayed images. 
Default: no sharpness adjustment 
Sharpness function is disabled when the input source ratio is the same as the panels 
native ratio