Metz 20 TK 51 User Manual

- 48 -

)HDWXUH

To Store Settings
In Feature menu all settings are stored auto-

matically.

Installation Menu

To enter the Installation menu directly, press

the Blue (

) button, or

Press "MENU" button, now you are in main

menu. In the main menu, select Install.
using or button. Then enter the In-
stall menu pressing / or MODE

button.

0HQX

When any item is selected with or

button in the install menu, the selected item

will be highlighted on the bottom bar.
Changes by pressing or button will

be result only at highlighted item on the bot-

tom bar.
Selecting Programme
To select programme number, you can use
or button, Digit Buttons or The

Double Digit button with digit buttons.

,QVWDOO

3&&

Selecting Band
Band, can be chosen either,
C or S by or button.
Selecting Channel

Channel can be changed by or but-

ton, by Digit Buttons or by the Double Digit

button with digit buttons.
For band C,
01 - 83,
For band S,
01 - 41.
Selecting Search

To start the search process, press

but-

ton for forward search or

button for back-

ward search. If a signal is found or reaches

to end of the band after searching, press
or buttons to continue search pro-

cess. To stop the search process when you
want, press or buttons again.
Selecting Fine Tuning
You can use the Fine Tuning process for

fine adjustment (after coarse adjustment), if

you are not happy about the image on the

screen.
Use or button on Fine Tuning item,

until getting the best image on the screen.
Normally the Fine Tuning cursor is placed

next to the left side on the slider and this is

indicated with one arrow.