Metz 20 TM 52 User Manual

- 38 -

Features

It is a remote controlled colour television

and PC monitor.

100 programmes from VHF, UHF bands or

cable channels can be preset.

It can tune cable channels.
Controlling the TV is very easy by its menu

driven system.

It has 2 pieces of Euroconnector socket for

external devices (such as video, video

games, audio set, etc.)

Stereo sound system (German) is available.
Multilanguage OSD.
Teletext (Fastext, 7 pages).
It is possible to connect headphone.
A.P.S. (Automatic programming system)
All programmes can be named.
Programme swapping between last

watched two programmes.

Forward or backward automatic tuning.
Sleep timer.
Child lock
4:3, 16:9 Auto switch
Automatic sound mute when no transmis-

sion.

When no valid signal is detected, after 5

minutes the TV switches itself automatically

to stand-by mode.

NTSC Playback.
TV Picture in PC.
PLL (Channel Search)
PC input (Support Up to 1024 x 768)

Panel Features

High resolution, 20-inch TFT LCD display.
High contrast ratio (500:1 Typical)
Brightness: 450 cd/m

High-speed response time 16 msec.
Wide viewing angle (typical) 160° (horizontal)

and 120° (vertical).

8-bit colour depth, display 16.7 M colours.

Safety Precautions

1. Power Source

The TV set is designed to operate on 12 V

DC. The adaptor should be operated from a

230V AC, 50 Hz. outlet. Ensure you select

the correct voltage setting for your conve-

nience.

2. Power Cord

The power supply cord should be placed so

that it is not likely to be walked on or pinched

by items placed upon them or against it. Pay

particular attention to cord where it enters

the plug, power outlet, and the point where it

exits from the receiver.

3. Moisture and Water

Do not use this equipment in a humid and

damp place (avoid the bathroom, the sink in

the kitchen, and near the washing machine).

Do not expose this equipment to rain or wa-

ter, as this may be dangerous and do not

place objects filled with liquids on top. Avoid

from dripping or splashing.

4. Cleaning

Before cleaning, unplug the adaptor from the

main supply, outlet. Do not use liquid or

aerosol cleaners. Use soft and dry cloth.

5. Ventilation

The slots and openings on the receiver are

intended for ventilation and to ensure reli-

able operation. To prevent overheating,

these openings must not be blocked or cov-

ered in anyway.

6. Lightning

In case of storm and lightning or when go-

ing on holiday, disconnect the power cord

from the wall outlet.

7. Replacement Part

When replacement parts are required, be

sure the service technician has used re-

placement parts which are specified by the

manufacturer or have the same specifica-

tions as the original one. Unauthorised sub-

stitutions may result in fire, electrical shock,

or other hazards.