Magnavox 32MD301B User Manual

English

INTR

ODUCTION

PREP

ARA

TION

ATCHING TV

USING FUNCTIONS

OPERA

TING D

CONNECTING DEVICES

INFORMA

TION

USEFUL TIPS

PREPARATION

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

Before you connect:

Be sure your antenna or other device is connected properly
before plugging in the AC power cord.

Antenna Connection

Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.

VHF / UHF

analog

DTV antenna

cable TV signal

RF coaxial cable

32”

26”

VHF / UHF

analog

DTV antenna

RF coaxial cable

cable TV signal

22”/19”

Once connections are completed, turn on the unit and begin
initial setup. Channel scanning is necessary for the unit to
memorize all available channels in your area. [Initial Setup]

➠

p. 15

Note

• If you have any question about the DTV’s antenna, visit

www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types

of combiners (mixers) or separators (splitters) for HD TV signal

the minimum RF bandpass on these devices is 2,000MHz or 2GHz.

• For your safety and to avoid damage to this unit, please unplug the

RF coaxial cable from the antenna input jack before moving the

unit.

• If you did use an antenna to receive analog TV, it should also

work for DTV reception. Outdoor or attic antennas will be more

effective than a set top or inside antenna.

• To switch your reception source easily between antenna and cable,

install an antenna selector.

• If you are not receiving a signal from your cable service, contact the

Cable provider.