NEC 4210W User Manual

16

Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.

1. Press the "WIDE / AUTO WIDE" button on the remote

controller.

m

• When 800 dot

2600 line signals are input, they are

converted to 640 dot

2480 line or 853 dot2480 line

signals.

• When 1024 dot

2768 line signals are input, they are

converted to 640 dot

2480 line or 853 dot2480 line

signals.

• When 1280 dot

21024 line signals are input, they are

converted to 597 dot

2478 line.

See page 50 for details on the display output of the
various vesa signal standards supported by the moni-
tor.

• When 852 dot

2480 line wide VGA (*) signals with

a vertical frequency of 60 Hz and horizontal frequency
of 31.72 kHz are input, select "WIDE" for the "RGB
SELECT" setting. Since selecting an 848

2480 sig-

nal automatically displays the image in correct size,
it is not necessary to change the RGB SELECT set-
ting.

* "IBM PC/AT" and "VGA" are registered trademarks of IBM, Inc.

of the United States.

The picture has the same size as the normal computer im-
age.

FULL size screen

The image is expanded in the horizontal direction.

When using a graphic accelerator boad that is capable of
displaying 848

2480.

FULL size screen

2. Within 3 seconds ...

Press the "WIDE/AUTO WIDE" button again.
The screen size switches as follows:

→

→



NORMAL size screen (4:3)