Bosch UML-262-90 User Manual

en | Installing the Monitor

Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

UML-422-90 Mounting Hole Dimensions

There are two (2) BNC connectors located on the rear side 

panel of the monitor for composite video inputs and two (2) 

BNC connectors for composite video outputs (see Figure 3.2 

and Figure 3.5).

Note: All video inputs are passive loop-through. The impedance 

is automatically set to 75 Ohm by the input of the signal on the 

input connector, while operating in a single connection mode 

(see Figure 5.10). If a cable is also connected to the output 

connector, the video signal can be passed on to another 

monitor connected to it via the passive loop-through function. 

Up to three (3) monitors may be connected in this manner (see 

Figure 5.11).

Note: To select between AV1 and AV2, press the Enter or Input 

button; then press the Up or Down arrow key on the front of the 

monitor. 

400 mm

200 mm