Bosch UML-262-90 User Manual

en | Installing the Monitor

Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

2.

Configure the following settings for the Dinion camera:

–

VMD: OSD

–

Area:  1

–

Active: On

3.

Connect one flying lead to relay output three (3), on the 

back of the Dinion camera, and connect the other to relay 

output four (4).

4.

Connect the other end of the Trigger cable to the Trigger 

Input connector on the bottom panel of the monitor.

5.

Plug the monitor into a power socket; then press the 

Power button.

6.

On the monitor, access the Trigger menu:

a.

Press the Menu button.

b.

Press the Down Arrow button to access the Setup 

menu.

c.

Press the Right Arrow button to enter the Setup 

menu.

d.

Press the Down Arrow button until Trigger is 

highlighted; then press the Right Arrow button.

7.

Make the necessary changes to the Trigger menu so that 

the settings match the following:

8.

Press the Menu button three (3) times to exit the menu 

and to return to the video display.

Trigger Enable

On

Trigger Input

AV1

Buzzer

On

Trigger Time

10

Trigger Option

High