Benq VA261 User Manual

The On-Screen Display (OSD) menu

26

        

Setup menu

 

Auto installation

Clears both the TV channel list and the sequential channel list, then reloads and 

searches through the designated TV frequencies for available channels, and adds 

any found to the sequential channel list, depending upon the selected country: 

• If Australia or New Zealand is selected, this function loads the channel list 

and searches through the designated TV frequencies for that country, adding 

any found to the sequential channel list in their proper channel positions. 

• If 'Others' is selected as country, searches through all frequencies for the 

selected PAL TV standard, adding any channels found to the sequential 

channel list in sequential order starting a position zero. 

 

Manual 
installation

Used for adding channels to the sequential channel list. Allows you to manually 

select a channel position in the sequential channel list, and adjust its properties 

including channel frequency.  
See 

CH swap

Allows you to reorder the channel positions in the sequential channel list, as 

used by the Channel Up and Down buttons. 
See 

. 

AV 1

Selects the input signal terminal 

when AV1, AV2 or AV3 is selected as 

the input. Use these settings only 

whenever you have more than one 

signal type connected to the same 

input at the same time. 

Press   or   to 

make selection.

• S-Video

• CVBS 

 

(composite Video)

• Auto 

AV 2

AV 3

• CVBS 

 

(composite Video)

• YPbPr 

 

(Component video)

• Auto 

Auto

Automatically adjusts frequency, 

phase, H. position and V. position to 

place the image on the screen.

• No 

• Yes 

Frequency

Adjusts the display clock frequency. Press or to 

make adjustment.

0 to 100

Phase

Adjusts the display clock phase.

0 to 31

H. Position

Adjusts the horizontal position of 

the image.

0 to 100

V. Position

Adjusts the vertical position of the 

image.

0 to 100

Auto installation

Manual installation

CH swap

Select

Adjust

Enter

OK