Sony LF-V30 User Guide

25

This section explains the operations common to 
each frame in the [Base Station Settings] page.

1

Click the item to configure.
The information for the clicked item appears 
in the frame on the right.

2

Return to the [Base Station Settings] page.

3

Make settings or perform operations for the 
selected item.
If you make any settings, be sure to click [Set] 
to save the changes.

The remainder of this section explains the 
specific settings and operations of each frame in 
the [Base Station Settings] page.

Set the port of the Base Station when the NetAV 
function is to be used. 

1

If there are multiple Base Stations and 5026 is 
already being used, change the port number of 
the NetAV server.
You can specify port numbers in the range 
5021 to 5999.
At the time of purchase this item is set to 5026.

2

Select whether to enable or disable automatic 
updating for the Dynamic DNS. At the time of 
purchase, this is set to [Enable]. If [Enable] is 
set, the automatic NetAV check is performed 
on the same occasion.

3

Select whether to enable or disable automatic 
router configuration (UPnP).
When [Disable] is set, port forwarding needs 
to be set on the router.
At the time of purchase, this is set to [Enable].

4

Click this to save changes.

Select to disable automatic router configuration 
(UPnP) in the NetAV settings, and when port 
forwarding needs to be set on the router, follow the 
procedure below to set the Base Station’s IP address.

z 

The IP address, subnet mask, and default gateway used 
in the following procedure are only examples. Before 
you configure these settings, check the IP address 
settings of the router.

Set [IP Address Settings] to [Manual] in the 
[Internet Connection] frame and then enter 
the following information (

IP Address: 192.168.0.64

*1

Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1

*2

*1

Example when the IP address of the router 
is 192.168.0.1. If the IP address of the 
router is 192.168.1.1, enter 192.168.1.64 
for the IP address. If you are using multiple 
Base Stations, set a different setting for 
each Base Station, such as 64 and 65. 

*2

Example when the IP address of the router 
is 192.168.0.1. If the IP address of the 
router is 192.168.1.1, enter 192.168.1.1 
for the default gateway.

1

3

2

1

4

3

2