Sterling SSV-052R User Manual

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 

35 of 36 

Unpack all parts.  Check for the following: 

•  Conveying hopper with level sensor 

•  Control and maintenance unit 

• Venturi 

assembly 

•  Vinyl flexible hose 

•  Compressed air hose 

• Operating 

instructions 

•  Mount the conveying hopper using the flange provided on its base. 

•  Mount the control module at a location that is readily accessible.  Make sure 

that the compressed air hose and level sensor cable are long enough to 
reach the control module. 

•  Connect the compressed air supply from the control module to the fitting 

located on the material pick up wand.   

•  Connect shop compressed air to the regulator on the control module.  

Compressed air connection must be 70-90 psi (5-6 bar). 

•  Plus the control module into the main power socket.  Make sure that the 

correct voltage is being used. 

•  Adjust the level sensor to sense the material that is being conveyed into the 

conveying hopper. 

•  Maintain the unit as stated in Chapter 5 of this manual.